The installation direction of the filter and the removal of impurities in the core

Before the filter is installed, it is never allowed to open its packaging film or packaging bag, and the filter must be stored in accordance with the instruction manual on the packaging box. The equipment needs to be handled and placed gently during transportation, so that it can be To a certain extent, avoid violent collisions and vibrations.

U9彩票799cc    The installation direction of the filter must be correct. When the corrugated plate combination filter is mainly used for vertical installation, the corrugated plate needs to be effectively perpendicular to the ground. The connection between the equipment in the vertical direction and the frame is strictly prohibited. Deformation, breakage, leaking glue, etc.

    After the filter is installed, it needs to effectively ensure that its inner wall is clean and free of floating dust. The main inspection method can be directly wiped and inspected with white silk cloth. The clean room of the high-efficiency filter needs to be cleaned and wiped before installation. .

U9彩票799cc    The core position of the filter is the core. The filter element is directly composed of stainless steel wire mesh and filter frame during processing. Especially the stainless steel wire mesh is very easy to be damaged, so special protection is required.

U9彩票799cc    After the filter has been working for a period of time, certain impurities will be deposited in the core of the equipment. This is the increase in the pressure drop in the equipment, so the flow rate of the equipment will also decrease, which requires timely removal of the impurities in the equipment filter core. .

    In the process of removing impurities, the filter needs to pay special attention to the stainless steel wire mesh on the filter element must not be damaged or deformed, otherwise the filter media purity after the filter will not meet the design requirements .